Ready Mix Plaster
High-Performance, Polymerised Drymix Plaster
Ecoplast Ready Mix Plaster is a pre-blended, high-quality plaster formulated with 53 Grade OPC Cement, fly ash, graded natural sand, glass fibre, integral waterproofing compound, and other specialized admixtures. It ensures excellent bonding, crack resistance, and a smoother finish, eliminating the need for on-site sand/cement mixing.
Whether you’re working on interior or exterior walls, Ecoplast Ready Mix Plaster offers uniform consistency, reduces labor time, and helps maintain a cleaner job site. Its fiber reinforcement and advanced additives deliver superior durability, preventing debonding and reducing water absorption.
Strong Bonding
Ensures better adhesion on brick, block, or concrete.
Crack Resistance
Minimizes shrinkage and debonding issues.
Fiber Reinforced
Enhances toughness and load distribution.
Time-Saving
Pre-blended mix speeds up project timelines.
Waterproofing Compound
Reduces moisture penetration for longer life.
Less Labor & Material
Eliminates on-site mixing of sand and cement.
Smooth Finish
Offers superior surface quality, ready for painting.
Eco-Friendly
Incorporates fly ash, conserving natural resources.
Composition
- OPC Cement (53 Grade)
- Fly Ash (ROS 15% on 45 micron)
- Graded Natural Sand
- Glass Fibre
- Integral Waterproofing Compound
- Additional Admixture
Directions to Use
- Mix 40 kg of Ready Mix Plaster with 6-8 liters of water until a consistent plaster form is achieved.
- Allow the mixture to rest for ~10 minutes for chemical reactions before use.
- If the plaster sets and hardens, do not add water again; prepare fresh mix instead.
- Apply the mix within one hour of preparation.
- Once dried, cure 2-3 times a day for 7-10 days for optimal results.
- Before applying to concrete surfaces, coat with cement slurry for proper bonding.
Special Characteristics
Technical Data of Ecoplast Ready Mix Plaster
| Parameter | Value |
|---|---|
| Color | Greenish Grey |
| Mixing Proportion | 1:4 |
| Compressive Strength (14 Days) | 10–12 MPa |
| Dry Density | 1350–1500 kg/m³ |
| Wet Density | 1550–1700 kg/m³ |
| Initial Setting Time | 60 Minutes |
| Final Setting Time | 8–10 Hours |
| Coverage (12mm Thickness) | 16–18 sq.ft |
| Water Addition | 6–8 liters |
| Pot Life | 60 Minutes |
| Shelf Life | 3 Months |
| Dispersion Time | 10 Minutes |